How to control writing of feed rate to each move line?
Our Milltronics post processor is writing the feedrate to almost every line. It looks something like this:N00058G3F8.X.6895Y.1057I.0197J-.0035N00060G1F8.X.9139Y.0662Z.13While our FADAL posts something...
View ArticleDoes anybody of you have real experiance with programming of multichannel NC...
Customer has INDEX mill/turn NC machine with SINUMERIK 840D control system. This machine can have upto four turrets which could work independently. Movements of the individual turrets can be combined...
View ArticleClik here to view.
How do I prevent my tool from going into the workpiece during rapid motion...
Hello Community,I am using 4 axis cnc mill with B axis as a rotational axis. I used various offset surfaces for this program which you can see in the design tree.I have spent considerable time in...
View ArticleBuilding a new computer.
I'm building a new rig for running Pro/NC and I'm wondering if anyone has any insight. I'm thinking Quadro M4000 for a graphics card, 32gb of 2400 MHz ram, And of course a solid state drive. The big...
View ArticleAssembly to step file
Hi guysim trying to save an machining assembly file to a step file. Trouble is when it's opened in another software the whole assembly becomes one part and single parts can't be recognised,I just saved...
View ArticleClik here to view.
Problems when trying to get the G-code on PTC Creo Manufacturing
I get an error while trying to get the G-Code of a machining operation.I have the uncx files saved in the correct folder.I have done the same procedure on other computer and i dont have this...
View ArticleClik here to view.
Creo 3.0 & 2.0 Student Editions not opening new manufacturing window and not...
As the title states. I am able to create .prt files with ease and usually the next step after the final save would be to open a new manufacturing window. The recurring problem is that a new window will...
View Articleclime milling whem volume milling.
is there a way to force Creo to climb mill when doing a volume roughing sequence? it seems to go back and forth from conventional and climb when machining. Also is there a way to keep the tool down in...
View ArticleClik here to view.
Pro-E NC Sequence Simplified Representation
Dear Friends,How to create Simplified Representation in Pro-E NC Sequence because Iwant to show in drawing sheets required NC sequence only.If any body is going to help me highly appreciated.Thanks in...
View ArticleLocal Mill
Na versao nova do CREO 3.0 M20 não consigo executar (local mill) após uma operação de (Windows mill ou Volume mill), mas é uma operação normal no CREO Parametric . Como resolver este problema? Na...
View ArticleHas "By tip" been disabled for drilling cycles?
I'm defining a drilling cycle with pecking to install a start hole for some pocket milling. Something I've done countless times in the past.To avoid leaving drill marks on the bottom of the pocket, my...
View ArticleProblem with assembly constraints in Creo 2 M030
Hi All I am having a problem replacing a reference part in a manufacturing assembly, the part is in a family table, so I am selecting from within the parts files family table to replace. The model is...
View ArticleClik here to view.
using text in Creo sheetmetal is a nightmare?
I sent a dxf sheetmetal part with lots of engraved text (with a font thats suitable for lasercutting of course) to our manufacturer.They told me the text is totally messed up with lots of double lines...
View ArticleDynamic milling like MasterCAM?
Good morning, It was brought to my attention by a new coworker that use toprogram using MasterCAM on how to improve our machining process. He showedme some videos of the Dynamic milling...
View ArticleClik here to view.
ModuleWorks another bug ?
Keeping testing moduleworks on different projects. While testing a program I achieved with M080 and Vericut I went on M090 and Moduleworks to see what it does. And the simulation is not correct ! Once...
View ArticleClik here to view.
And Another problem with ModuleWorks
I ran into another simulation problemabove is a picture of Vericut sumulation in Creo 2above is the same program in Creo 3 with ModuleWorks. Note the gouging going on. It does the same gouging on the...
View ArticleClik here to view.
Module Works was Right!!
I had a part with 4 of the same cuts in it so I programmed the first 1 then Mirrored it to the second third and 4th location then ran play path and everything cut fine. I then ran Module works and it...
View ArticleSpeed not posting properly
I am having trouble with my speed not posting properly. I programmed the speed at 10000 and it posts at 0, if I program speed to 9999 it will post ok. I am thinking it is something with the post not...
View Article