Clik here to view.
K Factor Grayed Out
Hello Everyone. Here's a question about the K Factor in a component. When I open a part, I go to the EDIT menu and select SETUP, from there I'm able to select the bend allowance and select my K/Y...
View ArticleClik here to view.
ModuleWorks another bug ?
Keeping testing moduleworks on different projects. While testing a program I achieved with M080 and Vericut I went on M090 and Moduleworks to see what it does. And the simulation is not correct ! Once...
View ArticleFIL files
Where can I find learning materials to learn how to manipulate FILfiles?I like to do the way I want to see the G codes output.Thanks.Artin BaghdasarianSr. Manufacturing Engineer EATON...
View ArticleClik here to view.
Is there a round feature?
I put this out to the modeling community, but thought I would share here as well.How do you manufacturing guys get around this? Is there any Pro/Wire guys in this group? We come across this issue every...
View ArticleCreo 3.0 custom trajectory
We recently updated from Creo 2.0 to 3.0 F000. Now I cannot locate the custom trajectory toolpath. I can fake it using a regular 3-axis trajectory, but custom trajectory did a better job of integrating...
View Articlehow to start a mold design?
How to start a mold design, please any one explain with proper ppt or video
View Articlecreo and vericut
I have installed the ptc creo parametric 3.0 and vericut 7.4.1. When I try to simulate material removal at vericut, ptc says that the application vericut_dll is not available or is not supported in...
View Articlecreo, vericut integration
i'm little new to creoso anybody plese explain me how i can integrate vericut into creo 2.0i have already install both softwears but when i run nc check it gives "Application VERICUT_DLL is not...
View ArticlePlunge Milling
Hi guys,If anyone has any experience with plunge milling, perhaps they can help meout - I've not had experience with it.The tool manufacturer (Ingersoll) recommends that after the tool hasplunged, but...
View ArticlePosting Bugs
Hi! I found a thread from 2013 on how to post a bug, but it seems that thread is no longer valid. Technical Support is no longer available as an option. I want to report some bugs about Creo...
View ArticleClik here to view.
Gpost Fil help request for Fanuc Oi
I am trying to get the text from the PPRINT to come after the tool change and just cant seem to figure it out. I can get the Tool Name to go there (I've gotten the Tool Offset Number there aswell) but...
View ArticleCoord System calls (Revised)
I think I may have confused you all with my last email. Here's a clarification....Each fixture on my mill bed has its own coordinate system (i.e. operation #1 is G54, operation #2 is G56, etc.). When...
View Articlecreo and vericut
I have installed the ptc creo parametric 3.0 and vericut 7.4.1. When I try to simulate material removal at vericut, ptc says that the application vericut_dll is not available or is not supported in...
View Articlefeeds and speeds
can anyone give insight on how to have creo automatically output feeds and speeds based on material.
View ArticleClik here to view.
How to use Local Milling in Creo 3.0?
I am using Creo 3.0 to make program for CNC machine, but Local milling is not work with Volume milling! How to fix it? (How can I use Volume milling to replace it?)
View ArticleGpost Fil help request for Fanuc Oi
I am trying to get the text from the PPRINT to come after the tool change and just cant seem to figure it out. I can get the Tool Name to go there (I've gotten the Tool Offset Number there aswell) but...
View ArticleHow do i get info from a Creo MBD model to a Zeiss Calypso??
Is there anybody using and transfering info from a Creo 2.0 MBD model into a Zeiss Calypso CMM?What info can be used and how to?
View ArticleHowto use mold component catalog
Dear, I've installed Creo 1.0 M030.I've checked the options "Mold Component Catalog" and "Plastic Advisor" during installation.Plastic Advisor works, but I can't get any access to the Mold Component...
View Article