Help with Drilling in Pro/NC????
Can someone help with a drilling issue if you have time? I attached a file containing the result of what i want to drill. Problem is that not all the holes are drillable without to much manual labor. I...
View ArticleAutoAxis Windows 7 64bit
Hey guys, I just got a new box and I connot get autoaxis to work on my new computer, there are other guys i work with that have windows xp and 32 bit computers that autoaxis still works on there boxes,...
View ArticleClik here to view.
Incremental update problems
I am running windows 7 Profesional 64 bit and Creo Parametric 2.0 M030 and I did an Install of Creo2.0 M040 but Creo says it is still says M030? Below is a picture of loaded programs and features that...
View ArticleNC check screen vanish
When the NC check is finished playing in Creo 2.0 my screen always goes back to the pre-NC check state. In WF5.0 the NC check would allow you to view the material removed until you move the screen view...
View ArticleMill Window stock clearance
I need some help with a 'Mill Window' roughing sequence. The tool is coming down tangent to the 'Stock' which is not safe. I would like the tool to plunge in the space around the material. Does...
View ArticleCreo Tool Path Colors
I would like to see my tool paths in red, as they were in WF5. Creo plays them in blue. I would think it'd be in the options settings, but all I can find there is mill volume colors. Any suggestions...
View ArticleMill Window stock clearance
I need some help with a 'Mill Window' roughing sequence. The tool is coming down tangent to the 'Stock' which is not safe. I would like the tool to plunge in the space around the material. Does...
View ArticleClik here to view.
Retract Plane Shading
Hey Guys, I was wondering if anyone new of a way to not have the retract plane cross-hacheted everytime you create a new sequence? Is there a config option to turn this off? Thanks, Yodes
View ArticleHelp with expert machinist G-code Output
I'm new to pro/E and Creo. I am having trouble with the expert machinist output to G-Code. My Machine tool does not like the format of the post processor. I have the basic 2 ½ D CAM that comes with...
View ArticleProblem with assembly constraints in Creo 2 M030
Hi All I am having a problem replacing a reference part in a manufacturing assembly, the part is in a family table, so I am selecting from within the parts files family table to replace. The model is...
View ArticleCREO 2 FLOATING MODULES
Hi All Myself and the design engineer attending a user group session on Wensday night at the company who covers our PTC support, and we recieved the latest burn of Creo 2 M030 We hadn't stepped into...
View ArticleCreating Custom Drill Cycles
Hi, I'm trying to create a "custom" drill cycle for a gun drilling application on my NH4000 Horizontal. This requires a the gun drill to enter a counter bore with the spindle off, then fire up the...
View ArticleClik here to view.
Add Annotation-feature to a Template-file
Hey everybody, I have a question regarding the use of annotation features in template-files (*.xml) in an turning process. My goal is to establish an automated process in which already created...
View Articlesequences missing in material removal simulation
I am seeing (at times) that certain sequences do not appear to run in the material removal simulation. In this circumstance, it is drilling to rough and cut line milling used to circle interpolate...
View ArticleContaining toolpath in Roughing
When trying to create a roughing sequence the toolpath goes outside of the mill window. I need to control this because I have side clamps on my part. I have the mill window set to keep tool inside of...
View ArticlePeck tapping
HI guysis there a way to peck tap a hole. Had a look in parameters but can't see anything. Do I have to have more than one tapping sequence at varying depths.thanks for any helpmick
View ArticleMill Window stock clearance
I need some help with a 'Mill Window' roughing sequence. The tool is coming down tangent to the 'Stock' which is not safe. I would like the tool to plunge in the space around the material. Does...
View ArticlePRO NC V.S. THE OTHER GUYS
I just wanted to start a discussion to keep the forum talking. But anyway I have been using pro nc for a couple of years now I think it was wildfire 3 when I started. I used to use mastercam before my...
View ArticleProblem with assembly constraints in Creo 2 M030
Hi All I am having a problem replacing a reference part in a manufacturing assembly, the part is in a family table, so I am selecting from within the parts files family table to replace. The model is...
View ArticleCreo2.0 Manufacturing?
It's awfully quiet in here lately!! I was wondering how many have switched to Creo 2.0 for manufacturing and how well you like it? I have it loaded and have been testing it. It seems to be fairly...
View Article