Right angle head?
Anyone familiar with writing toolpath for right angle head? Do I build a special tool?Create a coordinate system that makes the code come out right, or what?
View ArticleUsing "Stock Model" in manufacturing
In Creo 3 i can create a "Stock Model" to get the remaining material after a NC Sequence.How can i set it as Real stock for next sequences?For example: first sequence is a Volume Roughing with a tool...
View ArticleClik here to view.
Trajectory Milling
Had some free time to work on this today. Source link I created a curve by equation and used that to drive a trajectory milling sequence for some long slots I needed to mill. here is the equation I...
View Articleoscillating toolpath
I was shown a toolpath today, created in MasteCAM, that oscillates in z with options to create either a sine wave or peaked path. In this case it was being used to cut a laminate and avoid heating up...
View Articlecreo, vericut integration
i'm little new to creoso anybody plese explain me how i can integrate vericut into creo 2.0i have already install both softwears but when i run nc check it gives "Application VERICUT_DLL is not...
View ArticleClik here to view.
Model Tree - how to stop Creo from automatically expanding all items
Anyone else notice this behavior? This occurs when I have an assembly, in NC mode only.Use-Case:Edit-definition of any feature (feature can be anything, part/sequence/mill/etc...)Press OK or Cancel to...
View ArticleNeed help in Sheetmetal Nesting
Dear Creo Users, kindly be informed that I am in a learning phase in Creo parametric. I need help in Sheetmetal manufacturing module in Creo. How can I arrange Creo Sheetmetal part in multiple time in...
View ArticleClik here to view.
Moduleworks : Cutcom still not working
I'm really getting annoyed about this Moduleworks. I loaded this morning Creo 3.0 M110 full of hope about this new release. I started programming a new part and simulated,cutcom is still not correctly...
View ArticleNot able to get parting lines for step files. Some lines are missing.
Hi everyone.I recently bought creo Tool design extension. I am not able to get parting lines properly on step files. I tried solidifying these files as well but could not work. Please find the attached...
View Articleturning: element-specific feedrate
Hi, is there an option, where i can choose an element-specific feedrate?So, let's assume that i want a finishing-feedrate of 0,1mm per revolution. Now there ist a cut-in on the outer surface of the...
View ArticleTools to improve Design for Manufacturability
Wondering what others are doing to help their engineers and designers achieve better design for manufacturability as new products are developed. Like many companies, we have a lot of tribal knowledge...
View ArticleWhat changes/improvements have been made to Manufacturing in Creo4?
I am sure this information is somewhere but I can't find it. Changes for lots of other things but not CAM. Josh
View ArticleWhere is Custom Trajectory in Creo 3.0?
In previous Creo versions there was a cutom trajectory button that is no longer visible in Creo 3.0. We use custom trajectory with curves to drive toolpath and take multiple depths of cuts.
View ArticleMaterial removal - Moduleworks
I'm looking for some tips on best practices for using material removal.I've been using Pro since '05 and recently went to Creo 3, the problems I have with Moduleworks are: -Takes a very long time to...
View ArticleCreo NC - How to create a custom tool Parameter file
For example, I would like "COORDINATE_OUTPUT" to default to SEQUENCE_SYS instead of the current MACHINE_SYS every time I make a new tool path. Also, is there a way to custom populate the quick...
View ArticlePost drill cycle output help
Hello all, I'm transitioning to Creo Manufacturing and having a few problems with my post processing. Here is the main issue:The controller I am using is an Anilam 6000M.When I post-process a CL file...
View ArticleWhere is Custom Trajectory in Creo 3.0?
In previous Creo versions there was a cutom trajectory button that is no longer visible in Creo 3.0. We use custom trajectory with curves to drive toolpath and take multiple depths of cuts.
View ArticleMold Cavity_Silhouette Curve_Skirt Surface_Rc Propeller
Hello !! I'm trying to make a mold for my propeller but i have some problems to close the silhouette curve around the hub. I've done some research correct me of i'm wrong and find that the curve is...
View ArticleModule Works settings question
Hi I am trying to understand how Module Works should be setup, but have got stuck on the setting Interpolation tolerance—Type the interpolation tolerance value to check for collisions and gouges.What...
View Articleptc creo 3 - ramp angle
dear friends;we are using creo 3 for cam programming , in roughing program although I mentioned ramp angle as 5 degree /less than 90 , cutter directly plunging on the material with out taking any ramp,...
View Article