How do i get info from a Creo MBD model to a Zeiss Calypso??
Is there anybody using and transfering info from a Creo 2.0 MBD model into a Zeiss Calypso CMM?What info can be used and how to?
View ArticleSpiral Milling
Has anyone created a spiral tool path on a fill surface were the tool starts on the outside and ends in the center. If so how did you do this?thanksEd
View ArticlePost Processor Problems
Hi,I'm running WF2 build m050 with a Fanuc robodrill mill.I've had problems with the beginning of sequences.The tool shouldrapid to X0 , Y0 and Z(clearance height) and from there continue cutting but...
View ArticleVerification software
Good morning, I am trying to figure out which to go with for my department. I wentto IMTS last week and was set on going with Vericut after I got back fromthe show. At the show I saw the NCSimul...
View ArticlePRO NC V.S. THE OTHER GUYS
I just wanted to start a discussion to keep the forum talking. But anyway I have been using pro nc for a couple of years now I think it was wildfire 3 when I started. I used to use mastercam before my...
View ArticleCreo CNC Program and post processor code generating capabilities
Hi,Currently we are dealing with 2 machines at client site . Now how can we know that if code generated by Creo Machining extension can be directly integrated with these machines or not. If we require...
View ArticleHeidenhain TNC 426/430 post processor for ProE
Hello,Does anybody have a Heidenhain TNC 426/430 post processor that theywould like to share with me?Oliver Coelho.alfanar Moulds (CAM Dept.) PO Box 104184 Riyadh...
View ArticleWhat changes/improvements have been made to Manufacturing in Creo4?
I am sure this information is somewhere but I can't find it. Changes for lots of other things but not CAM. Josh
View ArticleTools to improve Design for Manufacturability
Wondering what others are doing to help their engineers and designers achieve better design for manufacturability as new products are developed. Like many companies, we have a lot of tribal knowledge...
View ArticleProblem with assembly constraints in Creo 2 M030
Hi All I am having a problem replacing a reference part in a manufacturing assembly, the part is in a family table, so I am selecting from within the parts files family table to replace. The model is...
View ArticleCreo NC - How to create a custom tool Parameter file
For example, I would like "COORDINATE_OUTPUT" to default to SEQUENCE_SYS instead of the current MACHINE_SYS every time I make a new tool path. Also, is there a way to custom populate the quick...
View ArticlePeck Tables
Anyone using peck tables? If so would you be willing to share and example? Thanks in advance.
View ArticleDoes Production Machining give .tap and g-code functionality?
Will the production machining option in Creo give me the ability to post process my models in manufacturing mode to a .tap file. Will it also post process to g-code and does it come with the basic...
View ArticleMaterial removal - Moduleworks
I'm looking for some tips on best practices for using material removal.I've been using Pro since '05 and recently went to Creo 3, the problems I have with Moduleworks are: -Takes a very long time to...
View ArticleModule Works settings question
Hi I am trying to understand how Module Works should be setup, but have got stuck on the setting Interpolation tolerance—Type the interpolation tolerance value to check for collisions and gouges.What...
View Articlecreo, vericut integration
i'm little new to creoso anybody plese explain me how i can integrate vericut into creo 2.0i have already install both softwears but when i run nc check it gives "Application VERICUT_DLL is not...
View ArticleModuleWorks not displaying workpiece
So I loaded up M100 this morning to test out the new ModuleWorks and nothing shows up for simulation. I can show everything by checking the box for Target under view, but that doesn't help me with...
View ArticleDoosan DNM 500ii Sinumerik Post Processor
Hi there,I am currently setting up a 3-Axis DNM Doosan 500ii with a Siemens Sinumerik 828D Control and Creo 3.0 as the CAM software I am having some issues with the output G-Code concerning the tool...
View ArticleFIL help G332
Is it possible to modify my FIL file to add a macro that looks for the sequence type "roughing" or "re-roughing" and sets a G332 R1."surface mill" or "finishing" or "pocketing" G332 R3. does anyone on...
View Article4axis trajectory milling
can anyone explain how to do 4axis custom trajectory milling for a simple componenet???..............
View Article