ModuleWorks combined with machine kinematics
Hi! Are there any plans to include machine kinematics simulation along with Material Removal Simulation in ModuleWorks?This combination of simulations would be extremely useful!! I have not found any...
View ArticleClik here to view.
Need help defining and using 45 degree face mill
When trying to define a tool for face milling, I am unable to find a tool that gives the option of having an angle associated with it, radius seems to be the option. 45 degree face mills are a fairly...
View ArticleExporting individual sheetmetal part DXF data from assembly
Hi all, I am trying to export flat sheetmetal DXF data from Creo Parametric 2. The assembly containsa fairly large amount of components that need to be sent to LASER cutting. The arrangement and number...
View ArticleHowto use mold component catalog
Dear, I've installed Creo 1.0 M030.I've checked the options "Mold Component Catalog" and "Plastic Advisor" during installation.Plastic Advisor works, but I can't get any access to the Mold Component...
View ArticleProcess Manager Template selection
I have an issue with the Manufacturing process manager and predefined Manufacturing template selection.if you have pre defined manufacturing templates it seems can only choose one template at a time in...
View ArticleCreate solid model milling tool
I am trying to create a milling tool from a solid model. It is a special shape that I want to make sure cuts correctly. The solid model has 1 feature - Revolve. When I am in a manufacturing file, these...
View Articleusing solid tools and need help with all tool parameter names...
Good morning, I am starting to use solid tools to help with collision checks. Icreated a solid tool and got it into my session of ProMan but I do not knowall the parameters name to finish up the...
View ArticleClik here to view.
5-axis post processor (XYZBC)
Hi ,Right now am working on 5-axis.In that i want to know how to use Planar Machining as i mentioned in Image 1.BX,0 BY,0 BZ,0 NX,0 NY,0 NZ,0 As i mentioned in Image 2, How to use ABC rotary axis on...
View Articleexpert moldbase extension 7.0
plz tell me how to add component in expert moldbase extension 7.0...by using component editor...how to apply quilt on component?..how to apply udf on component.
View ArticleModuleWorks to replace Vericut
Hi all, just read this in article CS226148,ModuleWorks will replace NCCHECK & VERICUT starting from versions below: Creo Parametric 2.0 M210Creo Parametric 3.0 M090Starting from above versions,...
View ArticleCreo Machining Tutorial
Hi, I just learned about the creo machining feature and I am curious how to use it. If I have just a regular .prt file where do I start? The NC manufacturing seems to demand a .asm file and not a .prt...
View ArticleERROR after transmitting data on Machine
hi ppli am having following error on heidendein "20001717h" using tncremoand on FANUC "0086 ALARAM Dr Signal off" using pro-nc and DNC precisioncan any bdy help methanks
View ArticleCAD is OK, but CAM is not a CAM
Dear PTC CEO and programers. Deae PROE FANSI wrote this to the PTC, but no response. Forward message>I am using PROE WF5 PRO/nc as cad/cam system CAD is OK I like it. BUT!!! CAM-PRO/NC is not a CAM....
View Articleptc creo 3 - ramp angle
dear friends;we are using creo 3 for cam programming , in roughing program although I mentioned ramp angle as 5 degree /less than 90 , cutter directly plunging on the material with out taking any ramp,...
View ArticleHelp me about 4-Axis Miling
Hi Everyone, I wanna program with 4-Axis machine in Creo but I've just started and I meet many problems. Is there anyone who have document about 4-axis milling in Creo.We can make friend and transfer...
View ArticleMaterial removal - Moduleworks
I'm looking for some tips on best practices for using material removal.I've been using Pro since '05 and recently went to Creo 3, the problems I have with Moduleworks are: -Takes a very long time to...
View ArticleMold Cavity_Silhouette Curve_Skirt Surface_Rc Propeller
Hello !! I'm trying to make a mold for my propeller but i have some problems to close the silhouette curve around the hub. I've done some research correct me of i'm wrong and find that the curve is...
View ArticleHow to output CUTTER command to the CL-file
Hi, I need to get the cutter diameter in the g-post. I see the CUTTER command in CL-file but it is commented like $$-> CUTTER / 10.000000.There is an Article CS212554, but I have no access to...
View ArticleHelp me about 4-Axis Miling
Hi Everyone, I wanna program with 4-Axis machine in Creo but I've just started and I meet many problems. Is there anyone who have document about 4-axis milling in Creo.We can make friend and transfer...
View ArticleClik here to view.
Need help about Turning.
Hi everyoneI want to program with turning operation in Creo for the timing screw model, I've just started and I don't know where to start. Is there anyone can tell me how to do that?Thanks.
View Article