Clik here to view.
drilling issues
Has anyone seen this problem?I have a part with 12 through hole and 12 counterbores on the holes. When I drill the through holes everyting works fine, But when I counter bore the holes I only get half...
View ArticleClik here to view.
Any one else seeing more toolpath errors?
I have been finding more and more gouges lately and i am wondering if any one else has been finding the same. MAINTAIN_CUT_TYPE will generate these strange circular gouges.
View Article.tph file.do I need that?
When creating a NC assembly (.asm) in Creo2.0, a ".tph" is created in my workspace when I save it. But if I delete it, then it seems to have no influence on the NC file.So do I need to keep that file?...
View ArticleCreo2.0 Manufacturing?
It's awfully quiet in here lately!! I was wondering how many have switched to Creo 2.0 for manufacturing and how well you like it? I have it loaded and have been testing it. It seems to be fairly...
View ArticleTool Import of Speeds and Feeds
Is there a way to have the speeds and feeds that are put into a tool you create in a library automatically be put into the "Parameter" of the sequence you want to use based on the tool info? Seems like...
View ArticleCreating a pattern
Hello allim trying to machine a part in a multi blank I'm trying to create a pattern but having trouble. I want to machine the part complete before moving to the next part on the blank do u have to...
View ArticleHow can i trap a $$-> CSYS command in GPOST
Hi everybody, i'm writing a postprocessor using FIL and GPOST.Pro/NC doesn't export a rotation on C axis i need to position my tool.In NCL file i've the $$-> CSYS with all the values i need to...
View ArticleProfile Milling in Creo
Is it possible to dictate the order of regions that you wish Creo to complete in profile milling, rather than taking the same z off of each region in each slice? Thanks,
View ArticleRamp Help
Does anyone know if there is a simple way to mill a slot? I would think I could draw a line at the depth I want, use Trajectory mill, pick the line and use the ramp parameter to drive the tool in a zig...
View ArticleClik here to view.
Any one else seeing more toolpath errors?
I have been finding more and more gouges lately and i am wondering if any one else has been finding the same. MAINTAIN_CUT_TYPE will generate these strange circular gouges.
View ArticlePRO NC V.S. THE OTHER GUYS
I just wanted to start a discussion to keep the forum talking. But anyway I have been using pro nc for a couple of years now I think it was wildfire 3 when I started. I used to use mastercam before my...
View ArticleCreo2.0 Manufacturing?
It's awfully quiet in here lately!! I was wondering how many have switched to Creo 2.0 for manufacturing and how well you like it? I have it loaded and have been testing it. It seems to be fairly...
View ArticleCREO 2 FLOATING MODULES
Hi All Myself and the design engineer attending a user group session on Wensday night at the company who covers our PTC support, and we recieved the latest burn of Creo 2 M030 We hadn't stepped into...
View ArticleProblem with assembly constraints in Creo 2 M030
Hi All I am having a problem replacing a reference part in a manufacturing assembly, the part is in a family table, so I am selecting from within the parts files family table to replace. The model is...
View ArticlePost processor for fanuc controller
Hi, Can anybody help with downloading fanuc 310IS and f31ib contollersif readily available? or best way to learn how to create PP for the mentioned series. We need to use the output in Makino and...
View ArticleCustom Drilling
Is there a Creo 2.0 tutorial available for getting an intro to custom drilling? Looking to add dwell to some drilling and can't quite figure out how to set up the custom drill cycle. Thanks for any help!
View ArticleCreating Custom Drill Cycles
Hi, I'm trying to create a "custom" drill cycle for a gun drilling application on my NH4000 Horizontal. This requires a the gun drill to enter a counter bore with the spindle off, then fire up the...
View Articleregeneration in creo
I seem to run into a lot more prompts to regenerate in Creo that in Pro. There are some cases when using an old model from Pro in the new Creo manufacturing environment that I can regenerate, hit...
View ArticleCreo Machining Tutorial
Hi, I just learned about the creo machining feature and I am curious how to use it. If I have just a regular .prt file where do I start? The NC manufacturing seems to demand a .asm file and not a...
View ArticleClik here to view.
Creo 2.0 M030 and Work cells
Hi All I have just found another issue with Creo 2.0 with work cells I was trying to import a saved work cell last week, but when I tried to load, it came up with a new screen Now I tried to tick all...
View Article