Help with expert machinist G-code Output
I'm new to pro/E and Creo. I am having trouble with the expert machinist output to G-Code. My Machine tool does not like the format of the post processor. I have the basic 2 ½ D CAM that comes with...
View ArticleClik here to view.
How to turn off parting line display?
This creates "features" on the parts that just make it confusing for the person that has to make the part, how do you turn this off? blue is the shut off areas. green is the molded area. thanks
View ArticleCreo2.0 Manufacturing?
It's awfully quiet in here lately!! I was wondering how many have switched to Creo 2.0 for manufacturing and how well you like it? I have it loaded and have been testing it. It seems to be fairly...
View ArticleSurface milling by cutlines removed in Creo2
Thankyou PTC, for removing one of the best features in your manufacturing option. I can see you 'tried' to replace it with cutline milling, but whilst the end result may be the same in terms of NC...
View ArticleClik here to view.
Retract Plane Shading
Hey Guys, I was wondering if anyone new of a way to not have the retract plane cross-hacheted everytime you create a new sequence? Is there a config option to turn this off? Thanks, Yodes
View ArticleOptimizing region order
Is there a way to have Creo automatically order regions for the shortest path? When creating a large amount of hole features it works great. But for milling sequences I don't believe there is that...
View ArticleTapered scallops
HI eveveryone ive got to machine some tapered grooves/scallops around a tapered handle. The grooves have an axis ,was hoping to just come down vertically with my cutter following the axis which is at 5...
View Articlewelding
i am having a student edition of creo 2.0 parametric. i wanna do welding , but the welding option provided in the application tab is not getting executed when i click on it.
View ArticleCreo2.0 Manufacturing?
It's awfully quiet in here lately!! I was wondering how many have switched to Creo 2.0 for manufacturing and how well you like it? I have it loaded and have been testing it. It seems to be fairly...
View Articlecreo, vericut integration
i'm little new to creoso anybody plese explain me how i can integrate vericut into creo 2.0i have already install both softwears but when i run nc check it gives "Application VERICUT_DLL is not...
View ArticleProblem with assembly constraints in Creo 2 M030
Hi All I am having a problem replacing a reference part in a manufacturing assembly, the part is in a family table, so I am selecting from within the parts files family table to replace. The model is...
View ArticlePRO NC V.S. THE OTHER GUYS
I just wanted to start a discussion to keep the forum talking. But anyway I have been using pro nc for a couple of years now I think it was wildfire 3 when I started. I used to use mastercam before my...
View ArticleCreo Machining Tutorial
Hi, I just learned about the creo machining feature and I am curious how to use it. If I have just a regular .prt file where do I start? The NC manufacturing seems to demand a .asm file and not a...
View ArticleVERIFY cl command
Hello, I was reading the Help file on Probe commands and read the following: CL Command IssuedVERIFY / PNT [, CLEAR, a] [, PERMIN, b] ( ,OSETNO, c )OSETNO, cIndicates the difference between target...
View Article5 axis milling
hello everyboy, does anybody has any tutorial about 5 axis machining using creo 2.0?
View Articlesurfacing
Hi I'm trying to create a small surface on a large surface for machining.I've created a sketch on a plane then copied and pasted the surface i require then projected the sketch onto that surface,I then...
View ArticleConstant Load Volume Milling
Gentlemen, I am relatively new to programming using Pro NC and I am wondering if anyone knows much about the "CONSTANT LOAD" function for rough voluming. Everytime I try to use it in a closed pocket...
View ArticleReorganizing a mfg tree
I work with a lot of manufacturing files that were created years ago with several different versions of ProE as it evolved to Creo. I find a lot of these older mfg files have a disorganized trees. Of...
View ArticleHelp with expert machinist G-code Output
I'm new to pro/E and Creo. I am having trouble with the expert machinist output to G-Code. My Machine tool does not like the format of the post processor. I have the basic 2 ½ D CAM that comes with...
View ArticleProfile sequence starting on the centerline of the workpiece
I have noticed that any time I assign a profile sequence to a round part that enters from the center axis of the part for each slice, the post does not assign a feedrate and the machine errors out due...
View Article