Parameters in the post
Helloon one of our machines I need to alter the post so it generates different parameters in peck drilling cycle83 , I don't know where to look to add some parameters for this. Any ideas pls.im using...
View ArticlePRO NC V.S. THE OTHER GUYS
I just wanted to start a discussion to keep the forum talking. But anyway I have been using pro nc for a couple of years now I think it was wildfire 3 when I started. I used to use mastercam before my...
View ArticleCreo Machining Tutorial
Hi, I just learned about the creo machining feature and I am curious how to use it. If I have just a regular .prt file where do I start? The NC manufacturing seems to demand a .asm file and not a...
View ArticleHelp with expert machinist G-code Output
I'm new to pro/E and Creo. I am having trouble with the expert machinist output to G-Code. My Machine tool does not like the format of the post processor. I have the basic 2 ½ D CAM that comes with...
View ArticlePost Processor
We are currently running Wildfire 4 but will be upgrading to Cero pretty soon. I was asked to see if the processors will work with Creo. Can anyone let me know. Thanks Bernie
View Articlethreading and boring operation
i import one part and did drill inside by selecting the axis after i need to bore the hole at 50 mm starting point then i need to do thread mill on to the part that leave portion but it was telling to...
View ArticleCL-data to G-code
Hello,everybody!(sorry for my bad english) I am worked 7 years in ProE2001 made model mold form and CNC programm for mill.In this week my plant got a new PC with ProE WF 5.0.I have problem to get...
View ArticleClik here to view.
Corner Finishing
Has anyone tried out this new sequence? Was this implemented from pro toolmaker? I have found it to be usefull and pretty solid for finish those hard to get areas.
View ArticleCreo2.0 Manufacturing?
It's awfully quiet in here lately!! I was wondering how many have switched to Creo 2.0 for manufacturing and how well you like it? I have it loaded and have been testing it. It seems to be fairly...
View Articlesequences missing in material removal simulation
I am seeing (at times) that certain sequences do not appear to run in the material removal simulation. In this circumstance, it is drilling to rough and cut line milling used to circle interpolate...
View ArticlePRO NC V.S. THE OTHER GUYS
I just wanted to start a discussion to keep the forum talking. But anyway I have been using pro nc for a couple of years now I think it was wildfire 3 when I started. I used to use mastercam before my...
View Articlehow to add part's relation with manufacturing relation
i had made the relation in expert machinist in proe and in part module like 1.total material cost and 2.total process cost (milling) so how do i add this two relation and make it to add and display it...
View ArticleClik here to view.
Creo 2.0 M030 and Work cells
Hi All I have just found another issue with Creo 2.0 with work cells I was trying to import a saved work cell last week, but when I tried to load, it came up with a new screen Now I tried to tick all...
View Articlecreo, vericut integration
i'm little new to creoso anybody plese explain me how i can integrate vericut into creo 2.0i have already install both softwears but when i run nc check it gives "Application VERICUT_DLL is not...
View ArticleHelp with expert machinist G-code Output
I'm new to pro/E and Creo. I am having trouble with the expert machinist output to G-Code. My Machine tool does not like the format of the post processor. I have the basic 2 ½ D CAM that comes with...
View ArticleClik here to view.
Create Surface Constraints
I have a flange with 12 holes dia .112" on it. I want to constrain only 2xD surface under the flang without adding any additional features. How's That possible
View ArticleVERIFY cl command
Hello, I was reading the Help file on Probe commands and read the following: CL Command IssuedVERIFY / PNT [, CLEAR, a] [, PERMIN, b] ( ,OSETNO, c )OSETNO, cIndicates the difference between target...
View ArticleClik here to view.
Optional Stop (M01) before tool change on lathe
New Creo user here, taking a ton of time to find where Creo has hidden many things. Is there an easy way to add M01s before tool changes without screwing around in the tool motions tab? Trying to...
View ArticleSelection Filter
Is there a way to prevent the following ? In setting up a new milling sequence (cutline, profile, etc), with the surface reference collector tab selected and the selection filter set to Mill Volume...
View Article