how to use manufacturing parameter into design table
my main objective is to show the machining cost into design templateIn manufacturing module i made 9 different assembly, i make the relation to find out the machining time and setup the perameter =...
View ArticleLONG time to generate toolpaths.
Is anyone doing anything advanced to help compute toolpaths faster? I have a hot job and naturally its one of the most complex parts I've done. I am doing a Local Milling routine referencing a previous...
View ArticleClik here to view.
Creo 3 - New Volume mill
Looking at a case solution I discovered there should be a new volume mill sequence in creo 3. That's a good news =>https://www.ptc.com/appserver/cs/view/case_solution.jsp?n=CS172911&lang=en
View ArticleProblem with assembly constraints in Creo 2 M030
Hi All I am having a problem replacing a reference part in a manufacturing assembly, the part is in a family table, so I am selecting from within the parts files family table to replace. The model is...
View Articlecreo, vericut integration
i'm little new to creoso anybody plese explain me how i can integrate vericut into creo 2.0i have already install both softwears but when i run nc check it gives "Application VERICUT_DLL is not...
View ArticleUsing a Remote Desktop Connection
I recently had help from IT to set up a remote desktop connection to my workstation. I was hoping that I could use this connection to troubleshoot manufacturing issues as they come up on 2nd and 3rd...
View ArticleHelp with expert machinist G-code Output
I'm new to pro/E and Creo. I am having trouble with the expert machinist output to G-Code. My Machine tool does not like the format of the post processor. I have the basic 2 ½ D CAM that comes with...
View ArticleDrill sequences in 4 axis manufacturing
Hi I run a 4 axis mill wich the fourth axis is an A axis- revolving around the x axis. I want to use the drill and roughing sequences but do not succeed. In some of te sequences i can choose either 3,4...
View ArticleMULTAX/ON for 3-Axis Sequence on 5-Axis Machine
Forgive me if this has been asked before. Is there a way to force MULTAX for a 3-axis step in a 5-axis operation. We need A and B output in the 3-axis sequence as well as in the 5-axis CL data.
View Articleturn / mill-drill
Hi All Just when I thought I be winding down for Xmas, I just been given another project. We are looking at some new machinery in the new year, basically a turn / mill drill setup, and I now got to...
View ArticleCreo Machining Tutorial
Hi, I just learned about the creo machining feature and I am curious how to use it. If I have just a regular .prt file where do I start? The NC manufacturing seems to demand a .asm file and not a...
View ArticleUsing Pro NC in Creo 2???
Does anyone know how to get Creo 2 Pro NC module up and running? The old way was tools/Floating_Modules can't seem to figure it out in Creo 2. Also is there any enhancements to the tool anyone knows...
View ArticleClik here to view.
NC Solid Tools
Hey guys I have a question about solid tool models, is there a way to include my spindle speed, feed rates, step downs, and step overs in my relations? I have been trying to get them to work but, when...
View ArticleClik here to view.
Helical Trajectory Milling Issue
I do quite a bit of helical trajectory milling but since updating to creo2.0 M110 the helical milling is quite slow calculating the tool path. At the bottom of the curve cut menu there is a button that...
View Article3D MOLD Design using Pro Engineer
dear All,please advise and share... is there any one here using Pro Engineer for 3D Mold Design, i mean full complete mold design such as :1. Spliting core-cavity-slide2. Mold Base and standard/custom...
View ArticleCreating Custom Drill Cycles
Hi, I'm trying to create a "custom" drill cycle for a gun drilling application on my NH4000 Horizontal. This requires a the gun drill to enter a counter bore with the spindle off, then fire up the...
View ArticleProblem with play path animation - Creo 2.0 Win7 64bit
Hi all, I upgraded to Creo 2.0 M030 recently, from Creo/Elements Pro 5. I use manufacturing a lot, and the only issue I came up with is the tool play path animation. It seems like there is a graphics...
View Articlecreo, vericut integration
i'm little new to creoso anybody plese explain me how i can integrate vericut into creo 2.0i have already install both softwears but when i run nc check it gives "Application VERICUT_DLL is not...
View ArticleAssembly to step file
Hi guysim trying to save an machining assembly file to a step file. Trouble is when it's opened in another software the whole assembly becomes one part and single parts can't be recognised,I just...
View ArticleInstalling Creo 2.0 on second computer
Trying to install Creo Parametric 2.0 for a colleague (let's assume Aydee). Aydee is already using Creo on his work laptop, but it is slow, for the work he does. Very slow. I and Aydee would like for...
View Article