Help with expert machinist G-code Output
I'm new to pro/E and Creo. I am having trouble with the expert machinist output to G-Code. My Machine tool does not like the format of the post processor. I have the basic 2 ½ D CAM that comes with...
View ArticleMill-Turn
Anyone out there using Pro Nc to program multi-turret lathes? If so I would like to here some feed back on how Pro E performs in this area.Thanks.
View ArticleCreo 2.0-Pro/Manufacturing and Windchill
Does anyone have experience, good or bad, with using Windchill Prime to control manufacturing models, toolpath, and program revisions? Our modeling of parts and assemblies is in Windchill, but we are...
View ArticleClik here to view.
4axis trajectory milling
can anyone explain how to do 4axis custom trajectory milling for a simple componenet???..............
View Articlepost processor
how to add newly created option file(post processor) to the default postprocessor list plz reply ??? plz help me sir.................
View ArticlePass Parameter values to Operation Comments
Request the ability to pass parameter values to the Operation Comments section for display in the NCL / Post processor file.
View Articlepprint problem
I use pprint tool_table to output my tool list in G_code program, only problem is my CNC screen is too small, there is big gap between two colomn, how can I delete those gap.
View ArticleAuto Cutline in Creo 2
I am trying to use auto cutline in Creo 2 to mill a few hemispherical pockets with a ball end mill. I've used the auto cutline before on similar recessed pockets and it usually goes well. The problem...
View ArticleClik here to view.
Creo 2.0 Tool orientation in Vericut for Mill/turn jobs
Hello there, I have been trying to simulate material removal for mill/turn toolpaths in vericut. The workcell is Mill-turn 5 axis (see attached file).The tool orientation is right while reviewing...
View ArticleClik here to view.
Chamfer sequence
Guys, I am working a lot with the chamfer option in Creo 3, which from my point of view is an easy one for most of my times I have to use it. However it happens a lot that i need to make a chamfer...
View ArticleMill-Turn
Anyone out there using Pro Nc to program multi-turret lathes? If so I would like to here some feed back on how Pro E performs in this area.Thanks.
View ArticleTool BOM
In the tool setup there is a place to create a BOM for a tool. Is it possible to get this information out to a table on a setup drawing? If not how are people handling listing inserts etc. on their...
View Articleheidenhain post processor
does anyone have HEIDENHAIN iTNC530 post processor, pls mail me to narenshanmuga@gmail.com.........
View Articleregeneration in creo
I seem to run into a lot more prompts to regenerate in Creo that in Pro. There are some cases when using an old model from Pro in the new Creo manufacturing environment that I can regenerate, hit...
View ArticleClik here to view.
Chamfer sequence
Guys, I am working a lot with the chamfer option in Creo 3, which from my point of view is an easy one for most of my times I have to use it. However it happens a lot that i need to make a chamfer...
View ArticlePP Creation
I am in the process of creating post processer for 5 axis Machine. I need the output to be like below,Currently I am using Creo 3.0 for generating PP. How can I define cycle in the PP Like what they...
View ArticleIngersoll-Rand Sites using Creo Manufacturing
I am looking for some inter-company help with Creo Manufacturing implementation, post-processing, and managing files in Windchill inside Ingersoll-Rand. Scott JohnsonManufacturing EngineerMocksville,...
View ArticleClik here to view.
Finishing sequence
Is there a way that makes sure that you can control the way the tool aproaches the flat finishes surface. As you can see on the picture below there are several retracts and plunges where the tool...
View ArticleHelp with expert machinist G-code Output
I'm new to pro/E and Creo. I am having trouble with the expert machinist output to G-Code. My Machine tool does not like the format of the post processor. I have the basic 2 ½ D CAM that comes with...
View ArticleClik here to view.
Mold Design Problem, not able to create parting surface
Hi All, Is it possible to extract core cavity design for this fan model. I've tried to create parting surface but not yet successful.Model is attached. pls help!Thanks,Shashank
View Article