Dynamic milling like MasterCAM?
Good morning, It was brought to my attention by a new coworker that use toprogram using MasterCAM on how to improve our machining process. He showedme some videos of the Dynamic milling...
View ArticleFree_Feed and Direct move
I have been using the constant_load tool path and now that the retract can be controlled I like it a lot. Except, when I change free_feed from rapid to some value to avoid the collisions Vericut is...
View ArticleHowto use mold component catalog
Dear, I've installed Creo 1.0 M030.I've checked the options "Mold Component Catalog" and "Plastic Advisor" during installation.Plastic Advisor works, but I can't get any access to the Mold Component...
View ArticleClik here to view.
Tool path on a specific view
After programming a part, I always make a workshop document to show how to do the work. In some specific cases I have to display the tool path on the document. But sometimes, there is more than one...
View ArticleCan any one suggest me steps for getting EMX GENERAL ICON in Creo Mold Cavity..
Can any one suggest me steps for getting EMX GENERAL ICON in Creo Mold Cavity..I am using Creo 3.O and I installed EMX 9.O but i am not able to find EMX Icon/tooldbar in Creo Mold Cavity interferance...
View ArticleExtra line in post, causes dwell. Why? How do I fix it?
Thanks for reading, I hope someone can help.Look at the attached G code (underlined code is the problem and redundant) and tell me why this is, and how to get rid of it.ThanksJon
View ArticleClik here to view.
Solid tools parameters and report in drawing
Hi all. I mostly use solid tools for programming. I have some parameters defined in my tools such as the tool supplier and the tool reference. I would like to display those parameters in the drawings I...
View ArticleUDF in pro manufacturing
I want to build soem UDF's for milling sequences in some parts that I run. Can I build a UDF for a complete milling sequence and
View ArticleSolid tool setup - Pro/Manufacturing
I use solid tools to simulate G code in a full blown seat of Vericut. I have a solid tool in Creo that is giving me a problem. The tool design is a 3/8 bull nose end mill with a .06 radius. When I...
View ArticlePost Processor Fails.....?
Every time I try to post I get a "post processor fails" message. I was getting it last night but it went away after resetting my machine. Well its back tonight. I have tried other programs that I know...
View ArticleHow to generate CNC code for a simple milling operation?
Hello, I'm trying to generate a G code in CREO 2.0, but the didn't work. The manufacturing have give me just the number senquence of deslocament, but not the G code of operation. Someone new what...
View ArticleVericut version for Creo 3
What version of Vericut should be included with Creo 3 M010? It is using 7.1.5 on my system. I thought it was supposed to move up to 7.3.
View ArticleAdding new supplier in EMX
Is there any way to add new supplier in the EMX supplier list? Or is there any way to create our own supplier in EMX? Can anyone help me to solve this......
View ArticleSolid tool setup - Pro/Manufacturing
I use solid tools to simulate G code in a full blown seat of Vericut. I have a solid tool in Creo that is giving me a problem. The tool design is a 3/8 bull nose end mill with a .06 radius. When I...
View ArticleInstalling Creo 2.0 on second computer
Trying to install Creo Parametric 2.0 for a colleague (let's assume Aydee). Aydee is already using Creo on his work laptop, but it is slow, for the work he does. Very slow. I and Aydee would like for...
View ArticleSolid tool holders with tools?
Does anyone have some example files they would be willing to share? I need some to help me get something going.B
View ArticleExtra line in post, causes dwell. Why? How do I fix it?
Thanks for reading, I hope someone can help.Look at the attached G code (underlined code is the problem and redundant) and tell me why this is, and how to get rid of it.ThanksJon
View ArticleI am looking for a text font for engraving like Leroy with wider character...
The spacing on most of the single line character fonts in Creo do not allow for the width of the cutter used in engraving. Is there a way to space the characters? Is there a source for engraving fonts...
View ArticleClik here to view.
How do I prevent my tool from going into the workpiece during rapid motion...
Hello Community,I am using 4 axis cnc mill with B axis as a rotational axis. I used various offset surfaces for this program which you can see in the design tree.I have spent considerable time in...
View ArticleClik here to view.
Sheet metal nesting
Hi, I use NC Sheet metal of Creo 3.0 for auto nesting with clustering option. The repeat factor is set to 3 with weight priority 0. I want to eliminate the gap between groups. Attaching an image for...
View Article