clime milling whem volume milling.
is there a way to force Creo to climb mill when doing a volume roughing sequence? it seems to go back and forth from conventional and climb when machining. Also is there a way to keep the tool down in...
View ArticleAdding new supplier in EMX
Is there any way to add new supplier in the EMX supplier list? Or is there any way to create our own supplier in EMX? Can anyone help me to solve this......
View ArticleClik here to view.
Chamfering Issue
When I use the automated chamfering sequence I have a problem. If your chamfer angle doesn't match the tool even by a few minutes or seconds of the chamfer angle it won,t cut the chamfer.When dealing...
View ArticleEntries on new Volume Rough Sequence
With the old "classic" Volume sequence it is possible to set the parameter ROUGH_OPTION to ROUGH_AND_PROF and obtain a helical entry for the roughing portion of the sequence by setting options such as...
View ArticleClik here to view.
Sheet metal nesting
Hi, I use NC Sheet metal of Creo 3.0 for auto nesting with clustering option. The repeat factor is set to 3 with weight priority 0. I want to eliminate the gap between groups. Attaching an image for...
View ArticlePost Processor for Easel / Inventables Carvey CNC 3A milling machine
Hi Not sure if I've posted in the correct place so my apologies if wrong I've just purchased a little desktop CARVEY 3A CNC machine from Inventables which I intend to use for manufacturing 2 operation...
View ArticleClik here to view.
Is there a round feature?
I put this out to the modeling community, but thought I would share here as well.How do you manufacturing guys get around this? Is there any Pro/Wire guys in this group? We come across this issue every...
View Articlewhich postprossecer support
which postprossecer support herco machining center?in proengineering5.0?
View ArticleCreo CNC Program and post processor code generating capabilities
Hi,Currently we are dealing with 2 machines at client site . Now how can we know that if code generated by Creo Machining extension can be directly integrated with these machines or not. If we require...
View Article4th Axis Drilling
Hello, I am struggling with drilling a hole utilizing a 4th axis machine in Creo 2. The hole drills at the angle I need, but slightly off in X. The part rotates about a B (Y) axis. I have read some...
View ArticlePost Processor for a MultiCAM router
Like most of the newbies here, I'm looking for a post processor. In thiscase, one for a MultiCAM router. Anybody use Pro Machinist with aMultiCAM router?Thanks in advance,Albert
View ArticleClik here to view.
Solid model of HighFeed Mill
How can I get a HighFeed Mill to adjust the output correctly in relation to its geometry. The model I have is a STEP file. I am able to get a correct path when milling a vertical wall but it won't...
View ArticleClik here to view.
How to perform a simple swarf milling
I have little experience with multiaxis machining and I am struggling with a simple swarf milling. The surface i want to mill is the following: I have tried several sequences. With swarf milling...
View Articlewhich postprossecer support
which postprossecer support herco machining center?in proengineering5.0?
View ArticleFree_Feed and Direct move
I have been using the constant_load tool path and now that the retract can be controlled I like it a lot. Except, when I change free_feed from rapid to some value to avoid the collisions Vericut is...
View ArticleRight angle head?
Anyone familiar with writing toolpath for right angle head? Do I build a special tool?Create a coordinate system that makes the code come out right, or what?
View Articlecreo and vericut
I have installed the ptc creo parametric 3.0 and vericut 7.4.1. When I try to simulate material removal at vericut, ptc says that the application vericut_dll is not available or is not supported in...
View ArticleClik here to view.
4 Axis Tool Paths
Hello, In looking to build some experience with 4 axis milling on a Makino A71, I came across this tutorial on the learning exchange:...
View Article