Clik here to view.
Creo 2.0 M030 and Work cells
Hi All I have just found another issue with Creo 2.0 with work cells I was trying to import a saved work cell last week, but when I tried to load, it came up with a new screen Now I tried to tick all...
View ArticleHelp with expert machinist G-code Output
I'm new to pro/E and Creo. I am having trouble with the expert machinist output to G-Code. My Machine tool does not like the format of the post processor. I have the basic 2 ½ D CAM that comes with...
View ArticleMULTAX/ON for 3-Axis Sequence on 5-Axis Machine
Forgive me if this has been asked before. Is there a way to force MULTAX for a 3-axis step in a 5-axis operation. We need A and B output in the 3-axis sequence as well as in the 5-axis CL data.
View ArticleUsing Pro NC in Creo 2???
Does anyone know how to get Creo 2 Pro NC module up and running? The old way was tools/Floating_Modules can't seem to figure it out in Creo 2. Also is there any enhancements to the tool anyone knows...
View ArticleProblem with play path animation - Creo 2.0 Win7 64bit
Hi all, I upgraded to Creo 2.0 M030 recently, from Creo/Elements Pro 5. I use manufacturing a lot, and the only issue I came up with is the tool play path animation. It seems like there is a graphics...
View ArticleHas anyone used Volumill
I have had limited expirence using this 3rd party addon within Gibbs Cam but i was wondering if anyone had tried integrating it with NC manufacturing. The tool paths it generates look alot better than...
View ArticleCreating a pattern
Hello allim trying to machine a part in a multi blank I'm trying to create a pattern but having trouble. I want to machine the part complete before moving to the next part on the blank do u have to...
View ArticleVericut animation not working with Creo Elements Pro5
Just switched to Creo Elements Pro 5 and i can't get vericut to work. Is it not supported by this version does anyone know? Checked all the config settings and it seem to be set right. Thanks,Jeff
View ArticleUsing Pro NC in Creo 2???
Does anyone know how to get Creo 2 Pro NC module up and running? The old way was tools/Floating_Modules can't seem to figure it out in Creo 2. Also is there any enhancements to the tool anyone knows...
View ArticleHelp with expert machinist G-code Output
I'm new to pro/E and Creo. I am having trouble with the expert machinist output to G-Code. My Machine tool does not like the format of the post processor. I have the basic 2 ½ D CAM that comes with...
View ArticleG-Post and Part-number
Hi,when I start the post-processor, it asks me to enter the part number (1234 for example). How can I read this string from CIMFIL? Thanks,Paolo.
View ArticleCustomizing Vericut
I would like some help on how to customize Vericut 6.2. I have beed searching around a bit for solutions but nothing has really helped me. https://www.ptc.com/appserver/cs/view/solution.jsp?n=140955...
View ArticleClik here to view.
Threadmilling in CREO 2
When creating a threadmilling sequence it seems that it is trying to plunge from the operation retract instead of the sequence retract. I have it check to not always use the operation retract. I have a...
View ArticlePass Parameter values to Operation Comments
Request the ability to pass parameter values to the Operation Comments section for display in the NCL / Post processor file.
View Articlehow to make a tooling asembly
hi guysi would like to add my cutting tools to a back end (bt40) to help with my simulation. Ive created the tools and the back end part but dont know how to put the 2 together. thanks for any helpmichael
View ArticleCREO 2 FLOATING MODULES
Hi All Myself and the design engineer attending a user group session on Wensday night at the company who covers our PTC support, and we recieved the latest burn of Creo 2 M030 We hadn't stepped into...
View ArticleMulti-Language drawings in Productview - How to?
Hello, I would need advice regarding a requirement that I have for CAD drawings using Pro/E WF4 and Productview 9.1. It is regarding what we call "Multi-Language drawings". For our manufacturing...
View ArticleHowto use mold component catalog
Dear, I've installed Creo 1.0 M030.I've checked the options "Mold Component Catalog" and "Plastic Advisor" during installation.Plastic Advisor works, but I can't get any access to the Mold Component...
View ArticlePRO NC V.S. THE OTHER GUYS
I just wanted to start a discussion to keep the forum talking. But anyway I have been using pro nc for a couple of years now I think it was wildfire 3 when I started. I used to use mastercam before my...
View Article