Volume Milling in CREO 2
We just upgraded from WF4 to Creo 2 and Volume milling doesn't have the new interface that the other toolpaths do. Is PTC phasing out Volume Milling? If so, I use the rough and profile option a lot...
View ArticleClik here to view.
Toolpath skipping over hole
I am using Volume Rough to profile the inside of a pocket with a window mill and the setting on profile only. There are holes that break into this pocket and the toolpath wants to skip over these...
View ArticleProblem with play path animation - Creo 2.0 Win7 64bit
Hi all, I upgraded to Creo 2.0 M030 recently, from Creo/Elements Pro 5. I use manufacturing a lot, and the only issue I came up with is the tool play path animation. It seems like there is a graphics...
View ArticleDrill sequences in 4 axis manufacturing
Hi I run a 4 axis mill wich the fourth axis is an A axis- revolving around the x axis. I want to use the drill and roughing sequences but do not succeed. In some of te sequences i can choose either 3,4...
View ArticleHelp with expert machinist G-code Output
I'm new to pro/E and Creo. I am having trouble with the expert machinist output to G-Code. My Machine tool does not like the format of the post processor. I have the basic 2 ½ D CAM that comes with...
View ArticleHelp with Drilling in Pro/NC????
Can someone help with a drilling issue if you have time? I attached a file containing the result of what i want to drill. Problem is that not all the holes are drillable without to much manual labor. I...
View ArticleClik here to view.
Questions on the new interface
Hi All I have two questions regarding the new interface for manufacturing. 1st question The parameter table Now I know that when you hit the green button , you have access to the full table, my...
View ArticleClik here to view.
Creo 2.0 M030 and Work cells
Hi All I have just found another issue with Creo 2.0 with work cells I was trying to import a saved work cell last week, but when I tried to load, it came up with a new screen Now I tried to tick all...
View ArticleHowto use mold component catalog
Dear, I've installed Creo 1.0 M030.I've checked the options "Mold Component Catalog" and "Plastic Advisor" during installation.Plastic Advisor works, but I can't get any access to the Mold Component...
View ArticleMULTAX/ON for 3-Axis Sequence on 5-Axis Machine
Forgive me if this has been asked before. Is there a way to force MULTAX for a 3-axis step in a 5-axis operation. We need A and B output in the 3-axis sequence as well as in the 5-axis CL data.
View ArticleArc Nibbling
The support have tell me to post here, to maybe have my little problem resolve. To be able to punch a part with a CNC, with a nibbling sequence in arc, with a G code, instead of point by point, one...
View ArticleHelp with expert machinist G-code Output
I'm new to pro/E and Creo. I am having trouble with the expert machinist output to G-Code. My Machine tool does not like the format of the post processor. I have the basic 2 ½ D CAM that comes with...
View ArticleAltering programmes
HI eveveryone would it annoy you if another programmer changed your program's without mentioning it to you? We have a new programmer who changes ever programme I've done . What procedure does your...
View ArticleUsing Pro NC in Creo 2???
Does anyone know how to get Creo 2 Pro NC module up and running? The old way was tools/Floating_Modules can't seem to figure it out in Creo 2. Also is there any enhancements to the tool anyone knows...
View ArticleChamfer back of hole
hello guysive got to machine a chamfer on the back of a 25mm hole using a 16mm dia dovetail cutter,ive tried using trajectory milling but the cutter just comes down through the component,how do i get...
View Articledrilling with angle head
AS SALAMO ALAIKUM BHAII Please see attach both videos 0f drilling with 90degree angle head...its looking good only in kinematic machine simulation in pro-e environment..but when i make a g-code of...
View ArticleLooking at Making some Small Plastic Parts???
Hi, I have been looking for a shop that can produce small plastic pins for us to no avail. Does someone have a contact that could produce these? Basicly they are .125dia x.250 long x .09375 dia and...
View ArticleVTXU Post Processor
Hello, Does anybody know of a post processor for a Huco VTXU 5 axis table table machine? I am running Creo Elements Pro or Wilfire 5.0. Any info would be a huge help.
View ArticleProblem with play path animation - Creo 2.0 Win7 64bit
Hi all, I upgraded to Creo 2.0 M030 recently, from Creo/Elements Pro 5. I use manufacturing a lot, and the only issue I came up with is the tool play path animation. It seems like there is a graphics...
View ArticleImporting parameters
Hi all I know I may be asking a silly question, but how do I import a parameter structure into a model. Basically I have created a set of Parameters and relations that do a lot of calculations. Now I...
View Article
