PRO NC V.S. THE OTHER GUYS
I just wanted to start a discussion to keep the forum talking. But anyway I have been using pro nc for a couple of years now I think it was wildfire 3 when I started. I used to use mastercam before my...
View ArticleProblems with units in Automatic Workpiece in Mold Cavity
Hello guys, I have quite a trouble with Automatic Workpiece in Mold Cavity. I just cant choose any units in offsets. I have no idea why. I did some googling but couldnt find anything usefull. Do you...
View ArticleProgramming on the highest level
These videos blow my mind...enjoy the work ofDanielSantos
View ArticleVolume Milling in CREO 2
We just upgraded from WF4 to Creo 2 and Volume milling doesn't have the new interface that the other toolpaths do. Is PTC phasing out Volume Milling? If so, I use the rough and profile option a lot...
View ArticleClik here to view.
NC Solid Tools
Hey guys I have a question about solid tool models, is there a way to include my spindle speed, feed rates, step downs, and step overs in my relations? I have been trying to get them to work but, when...
View Article3D MOLD Design using Pro Engineer
dear All,please advise and share... is there any one here using Pro Engineer for 3D Mold Design, i mean full complete mold design such as :1. Spliting core-cavity-slide2. Mold Base and standard/custom...
View ArticleCreo2.0 Manufacturing?
It's awfully quiet in here lately!! I was wondering how many have switched to Creo 2.0 for manufacturing and how well you like it? I have it loaded and have been testing it. It seems to be fairly...
View ArticleHelp with expert machinist G-code Output
I'm new to pro/E and Creo. I am having trouble with the expert machinist output to G-Code. My Machine tool does not like the format of the post processor. I have the basic 2 ½ D CAM that comes with...
View ArticlePRO NC V.S. THE OTHER GUYS
I just wanted to start a discussion to keep the forum talking. But anyway I have been using pro nc for a couple of years now I think it was wildfire 3 when I started. I used to use mastercam before my...
View Articleproblem with starting Manufacturing
To whom it may concern, Creo 2.0 Student EditionToday I wanted to study manufacturing in order to program milling process. I had clicked new > manufacturing (with checked nc assembly) > ok and...
View ArticleCreo Machining Tutorial
Hi, I just learned about the creo machining feature and I am curious how to use it. If I have just a regular .prt file where do I start? The NC manufacturing seems to demand a .asm file and not a...
View ArticleClik here to view.
parting lines; colors and extra surfaces.
In Creo2 mold design; this may be two different issues, but when you create your split models you end up with various color changes for what different things are (parting lines appear blue, etc). Can...
View Article5 axis machining
HIHi could anyone tell me what is creo 2 like for 5 axis machining,we might be getting a 5 axis machine and was wondering if the software is user friendly for it?thanks Mick
View ArticlePro e/milling
how to retract the tool after every pass completed in pro e milling ? either volume milling or trajectory milling
View Article3D MOLD Design using Pro Engineer
dear All,please advise and share... is there any one here using Pro Engineer for 3D Mold Design, i mean full complete mold design such as :1. Spliting core-cavity-slide2. Mold Base and standard/custom...
View ArticleCreo2.0 Manufacturing?
It's awfully quiet in here lately!! I was wondering how many have switched to Creo 2.0 for manufacturing and how well you like it? I have it loaded and have been testing it. It seems to be fairly...
View ArticleCustom Drilling
Is there a Creo 2.0 tutorial available for getting an intro to custom drilling? Looking to add dwell to some drilling and can't quite figure out how to set up the custom drill cycle. Thanks for any help!
View Articledifference between the two shrinkage formula's?
could some one please expalin the difference between the two different shrinkage formula's in Pro/Engineer. (1+S) and 1/(1-S)?
View ArticleIs it possible to have software only cut areas that previous tool did not cut???
After using a larger endmill to cut a part out is there a way or another sequence to simply use a smaller cutter to clean areas that larger tool did not get using a window or whatever that may be?
View ArticleHow to change a parameter during a simulation (Pro-E Creo)
Hey guys,i got a problem. I try to change a parameter with relationships of one of my constructions from my assembly and all that DURING a mechanism-analysis.Until now i could change the parameter i...
View Article