Clik here to view.
Create Surface Constraints
I have a flange with 12 holes dia .112" on it. I want to constrain only 2xD surface under the flang without adding any additional features. How's That possible
View ArticleCREO 2 FLOATING MODULES
Hi All Myself and the design engineer attending a user group session on Wensday night at the company who covers our PTC support, and we recieved the latest burn of Creo 2 M030 We hadn't stepped into...
View ArticleHelp with expert machinist G-code Output
I'm new to pro/E and Creo. I am having trouble with the expert machinist output to G-Code. My Machine tool does not like the format of the post processor. I have the basic 2 ½ D CAM that comes with...
View Article3D MOLD Design using Pro Engineer
dear All,please advise and share... is there any one here using Pro Engineer for 3D Mold Design, i mean full complete mold design such as :1. Spliting core-cavity-slide2. Mold Base and standard/custom...
View Articlethreading and boring operation
i import one part and did drill inside by selecting the axis after i need to bore the hole at 50 mm starting point then i need to do thread mill on to the part that leave portion but it was telling to...
View ArticleInstalling Creo 2.0 on second computer
Trying to install Creo Parametric 2.0 for a colleague (let's assume Aydee). Aydee is already using Creo on his work laptop, but it is slow, for the work he does. Very slow. I and Aydee would like for...
View ArticleVolume Milling in CREO 2
We just upgraded from WF4 to Creo 2 and Volume milling doesn't have the new interface that the other toolpaths do. Is PTC phasing out Volume Milling? If so, I use the rough and profile option a lot...
View Articlecreo, vericut integration
i'm little new to creoso anybody plese explain me how i can integrate vericut into creo 2.0i have already install both softwears but when i run nc check it gives "Application VERICUT_DLL is not...
View Articlethread milling
Hi guysI've got to do some thread milling on a job but I've never done any before,any helpful advice would be appreciated regarding parameters etc.Thanks mick
View ArticleHowto use mold component catalog
Dear, I've installed Creo 1.0 M030.I've checked the options "Mold Component Catalog" and "Plastic Advisor" during installation.Plastic Advisor works, but I can't get any access to the Mold Component...
View ArticlePosition of tool at start and end of 3-axis milling process
Hi, The tool starts few units outside the boundary to be machined when a milling process is initiated. It goes few units out at the end of the process. Is there any option to make the tool to stay...
View ArticleConstant Load Volume Milling
Gentlemen, I am relatively new to programming using Pro NC and I am wondering if anyone knows much about the "CONSTANT LOAD" function for rough voluming. Everytime I try to use it in a closed pocket...
View ArticleMill windows and new reference model
I have a complex part that I programmed from a STEP file. This part is an aerospace/defense part so I can only recieve STEP files, not native CAD files. Since the last time we made the parts, there was...
View ArticleSelection Filter
Is there a way to prevent the following ? In setting up a new milling sequence (cutline, profile, etc), with the surface reference collector tab selected and the selection filter set to Mill Volume...
View ArticlePost Processor
We are currently running Wildfire 4 but will be upgrading to Cero pretty soon. I was asked to see if the processors will work with Creo. Can anyone let me know. Thanks Bernie
View ArticleVERIFY cl command
Hello, I was reading the Help file on Probe commands and read the following: CL Command IssuedVERIFY / PNT [, CLEAR, a] [, PERMIN, b] ( ,OSETNO, c )OSETNO, cIndicates the difference between target...
View Articlewelding
i am having a student edition of creo 2.0 parametric. i wanna do welding , but the welding option provided in the application tab is not getting executed when i click on it.
View ArticleVolume Milling in CREO 2
We just upgraded from WF4 to Creo 2 and Volume milling doesn't have the new interface that the other toolpaths do. Is PTC phasing out Volume Milling? If so, I use the rough and profile option a lot...
View ArticleRoughing depth
Does anyone else have a problem with the Roughing toolpath not machining all of the way to the bottom of pockets? I have messed with the min and max step depths and step depth adjust. It only wants to...
View ArticleAssembly to step file
Hi guysim trying to save an machining assembly file to a step file. Trouble is when it's opened in another software the whole assembly becomes one part and single parts can't be recognised,I just...
View Article