Problems with units in Automatic Workpiece in Mold Cavity
Hello guys, I have quite a trouble with Automatic Workpiece in Mold Cavity. I just cant choose any units in offsets. I have no idea why. I did some googling but couldnt find anything usefull. Do you...
View Articlecreo, vericut integration
i'm little new to creoso anybody plese explain me how i can integrate vericut into creo 2.0i have already install both softwears but when i run nc check it gives "Application VERICUT_DLL is not...
View ArticleVERIFY cl command
Hello, I was reading the Help file on Probe commands and read the following: CL Command IssuedVERIFY / PNT [, CLEAR, a] [, PERMIN, b] ( ,OSETNO, c )OSETNO, cIndicates the difference between target...
View Articlethreading and boring operation
i import one part and did drill inside by selecting the axis after i need to bore the hole at 50 mm starting point then i need to do thread mill on to the part that leave portion but it was telling to...
View ArticleClik here to view.
Create Surface Constraints
I have a flange with 12 holes dia .112" on it. I want to constrain only 2xD surface under the flang without adding any additional features. How's That possible
View ArticleClik here to view.
Optional Stop (M01) before tool change on lathe
New Creo user here, taking a ton of time to find where Creo has hidden many things. Is there an easy way to add M01s before tool changes without screwing around in the tool motions tab? Trying to...
View ArticleWindow Pop Ups in Creo 2.0
We just loaded Creo 2, M090 and now the windows (the play path, parameters, etc) pop up directly in the center of the screen. I know that there is an easy fix, but can't remember going through it when...
View ArticlePass Parameter values to Operation Comments
Request the ability to pass parameter values to the Operation Comments section for display in the NCL / Post processor file.
View ArticleProfile Milling in Creo
Is it possible to dictate the order of regions that you wish Creo to complete in profile milling, rather than taking the same z off of each region in each slice? Thanks,
View ArticleProfile Milling Parameters
When profiling a part that has say 5 different profiles i want to cut and step down for each cut it does one cut and then goes to the next profile and does that 1st cut and so on. Is there a way to...
View ArticleDrill sequences in 4 axis manufacturing
Hi I run a 4 axis mill wich the fourth axis is an A axis- revolving around the x axis. I want to use the drill and roughing sequences but do not succeed. In some of te sequences i can choose either 3,4...
View ArticleClik here to view.
Retract Plane Shading
Hey Guys, I was wondering if anyone new of a way to not have the retract plane cross-hacheted everytime you create a new sequence? Is there a config option to turn this off? Thanks, Yodes
View ArticleHelp with expert machinist G-code Output
I'm new to pro/E and Creo. I am having trouble with the expert machinist output to G-Code. My Machine tool does not like the format of the post processor. I have the basic 2 ½ D CAM that comes with...
View Articlesequences missing in material removal simulation
I am seeing (at times) that certain sequences do not appear to run in the material removal simulation. In this circumstance, it is drilling to rough and cut line milling used to circle interpolate...
View Article5 ax hole making or drilling
I have a model with 175 holes on a cylinder before(in wildfire4) I could pick tool and axis and they would drill to depth without picking depth or giving a dimension now in Creo2 I can't seem to get...
View ArticleAssembly to step file
Hi guysim trying to save an machining assembly file to a step file. Trouble is when it's opened in another software the whole assembly becomes one part and single parts can't be recognised,I just...
View ArticleInstalling Creo 2.0 on second computer
Trying to install Creo Parametric 2.0 for a colleague (let's assume Aydee). Aydee is already using Creo on his work laptop, but it is slow, for the work he does. Very slow. I and Aydee would like for...
View ArticleLONG time to generate toolpaths.
Is anyone doing anything advanced to help compute toolpaths faster? I have a hot job and naturally its one of the most complex parts I've done. I am doing a Local Milling routine referencing a previous...
View ArticleSurface milling by cutlines removed in Creo2
Thankyou PTC, for removing one of the best features in your manufacturing option. I can see you 'tried' to replace it with cutline milling, but whilst the end result may be the same in terms of NC...
View ArticleHelp with expert machinist G-code Output
I'm new to pro/E and Creo. I am having trouble with the expert machinist output to G-Code. My Machine tool does not like the format of the post processor. I have the basic 2 ½ D CAM that comes with...
View Article